Gtech AirRAM MK2 - Brush Bar Cleaning and Battery Replacement; Cleaning Brush Bar Hair; Re-inserting Brush Bar; Replacing Battery

12
The brush bar can now be removed, starting at
the button end.
To remove hair from the brush bar, run an
open pair of scissors down the groove to cut
the hair, then pull it out.
Re-insert the brush bar, starting by the end
furthest away from the button. Then line up
and push the brush bar into the AirRAM until it
clicks into place.
Replace the battery by sliding it down into the
head assembly.
It will click into place.
4092_AR29_UK_manual_aw.indd 124092_AR29_UK_manual_aw.indd 12 10/02/2020 14:3010/02/2020 14:30