Care, Maintenance, and Storage
Wear protective gloves when handling the blade.
To ensure long and reliable service, carry out the following maintenance
regularly:
Check for obvious defects such as loose, dislodged, worn or damaged blades,
loose xings, and worn, damaged, or loose parts.
Check that covers and guards are correctly tted and undamaged.
Wear gloves when handling or cleaning the cutting blade.
Always clean the cutting blade after use and apply a lubricating oil or spray before
storage.
During longer cutting periods it is recommended to lubricate the blade. This will
improve cutting performance and maximise the run time.
Before use check the condition of the cutting edges of the blade and that the
blade xings are secure.
When not in use ensure that the blade guard is tted.
Do not use water, solvents, or polishes to clean the trimmer. Wipe clean with a dry
cloth.
Do not use abrasive materials to clean the product, and do not immerse it in
water.
Store in a dry place. Do not expose to moisture.
Store the tool in a secure, dry place out of reach of children and animals.
If the product needs to be repaired or replaced only use replacement parts
which are approved by the manufacturer.
Spare parts can be purchased from Grey Technology Ltd:
tel : 0870 794 4001 www.greytechnology.co.uk
Gtech helpline : 0870 7944001 email : support@greytechnology.co.uk
To Next Page
Loading...
