Guldmann GL5 - 4.03 Charging Procedure

To Next Page

To Previous Page

4.03 Charging procedure

Recharge lifter every night or when it is not in use. This maintains the batte-

ries and ensures a long life span.

Only use power supply provided by Guldmann.

Recharging

• Recharge by plugging the power supply lead

into the wall socket

• Recharging should be carried out when the

yellow or red LED is illuminated

• When the yellow LED illuminates there are

approx. 10 lifts remaining

• When the red LED illuminates and the audio

warning sounds, it is only possible to lower the

patient

• The power supply will turn off automatically

when lifter is fully recharged

• Recharging must not take place in wet rooms/

bathrooms

• Maximum recharging time is approx. 5 hours.

Alternative charging procedure

Remove the battery and place it on a dry surface. Connect power supply plug

to mains.

Now insert the male connector into battery.

Note:

Please be sure that main power is switched off during connection of power

supply and battery.

Other manuals for Guldmann GL5