PLANEBOOK
TM
OWNER’S MANUAL
© Gulfstream 2008 49 PlaneBook™ Owner’s Manual
Hibernation (Save-to-Disk) Feature
The Hibernation feature saves the contents of your
notebook’s system memory to the hard drive as a
part of the Suspend/Resume mode. You can enable
or disable this feature.
The default settings are not enabled. To enable or
disable the Hibernation feature, follow these steps:
• From the Start menu, select Settings, and then
select Control Panel.
• From the Control Panel, select Power Options.
• Select the Hibernate tab. Select the box to enable
or disable this feature.
Windows™ Power Management
The Windows™ operating system used by
PlaneBook™ has provisions for configuring power
options for maximizing battery life. The Power
Options Properties dialog box can be accessed
form the Start menu by selecting Start Æ Settings
Æ Control Panel Æ Power Options. The Power
Options Properties dialog box has the following
tabs (among others) where selections can be made:
• Power Schemes and Settings for the Scheme
• Alarms (for Low Battery and Critical Battery)
• Power Meter
• Advanced Options (With Power Button Functions)
• Hibernation Controls
To Next Page
Loading...