14
Wiring connections in
Compartment B
1. Switch o the power supply to the Hub. Check that the
“Mains Present” LED is not lit. Ensure power is disconnected
to all other cables and devices.
2. Remove the cover from Compartment B, saving the screws
for later reattachment.
3. Using the wiring diagrams on Page 13, connect data input
cables to the terminals in Compartment B.
4. Reattach the cover on Compartment B.
Wiring diagrams
Please contact your supplier for guidance on wiring your
particular installation.zzzzzzzz
To Next Page
Loading...