EN
32
OPERATING INSTRUCTIONS
CHANGE / CLEAN FILTER
Remove filter
Filter removal according to illustration
When removed immediately after boiling, the filter elements can be
be warmed up. Remove with gloves or oven mitts if necessary.
- Pull out the technical drawer as far as it will go.
- Lift off the condensation filter (4).
- Remove drip tray (14).
- Pull the filter container (16) approx. 5 cm forward and remove it.
- Open the lid of the filter container (16).
- Remove grease and activated carbon fine dust filter (17+18).
Never place parts on active hobs !
To Next Page
Loading...
Need help?
General
