GVA LIRA User Manual

Architectural Spot & Flood Light
INSTALLATION GUIDE
GVA Lighting, Inc. 3400 Ridgeway Drive, #14 Missisauga, Ontario L5L 0A2
Tel: + 1 905 569 6044 Email: info@gvalighting.com gvalighting.com
IG-LIRA, 2018-08-28 | Page 1 / 9
LIRA
™
WARNING
CAUTION
Do not attempt to install or use Luminaire(s) until you have read and
understand this guide and all safety labels.
Luminaire(s) must be installed by a qualified professional.
Luminaire(s) must be installed in accordance with all national and
local electrical and construction regulations.
Ensure that main power supply is OFF before installing or wiring
luminaire(s).
Do not exceed specified voltage and current input.
Do not use luminaire(s) with a damaged lens, body, or cable.
Failing to install luminaire(s) according to warnings may result in
a hazardous situation which can cause equipment and property
damage, personal injury, or death.
Do not exceed the maximum number of specified luminaires in a light
run. Doing so will result in a current overload.
GVA Luminaires have no serviceable parts. Do not attempt to open
the units.
Do not hot swap. Ensure power supply is off before connecting or
disconnecting fixtures.
Do not stare into beam or view directly with optical instruments.
Unauthorized feild repairs will void warranty.

GVA LIRA Specifications

General

Brand	GVA
Model	LIRA
Category	Lighting Equipment
Language	English

Summary

LUMINAIRE INSTALLATION

MOUNTING PLATE

Use suitable hardware to mount the plate. Improper hardware can lead to detachment and damage.

OPTICAL ACCESSORY INSTALLATION

Install LIRA optical accessory using M3x0.5x5mm Flathead Screws.

MOUNTING THE LUMINAIRE

Fasten luminaire to mounting plate using supplied screw and Allen key.

LUMINAIRE ADJUSTMENT

Rotate luminaire to desired orientation and torque set screws to lock in place.

CONNECTION DIAGRAMS

TYPICAL SYSTEM DIAGRAM

Illustrates connections to junction boxes and luminaires for system setup.

PDB-ELV & PS-ELV WIRING DIAGRAMS

Wiring diagrams for PDB-ELV and PS-ELV power distribution units.

DMX JUNCTION BOX WIRING

Diagrams for DMX bus and radial/star connections in junction boxes.

NON-DIMMING JUNCTION BOX WIRING

Diagrams for non-dimming bus and radial/star connections in junction boxes.

CONSTANT CURRENT JUNCTION BOX WIRING

Diagrams for constant current bus and radial/star connections in junction boxes.