GVM GVM-50RS - How to Use; Mode Selection; Channel Adjustment; Brightness Adjustment

10
① Mode selection：
There are two kinds of more which are host mode and slave mode,
switching through mode button (automatically as host mode when switch
on the machine). In host mode, it is able adjust lightness, color
temperature and channel value, and it is also able to connect APP, and
control the parameters through APP. While in the slave mode, it is only
able to set channel value, rather than lightness and color temperature.
② Channel adjustment：
Set channe l value using channel addition and subtraction key, ranging
from 0 to 11.
③ Brightness adjustment：
Cara Menggunakan
In the host mode, adjust lightness through the knob or APP, ranging from
10% to 99%.
④ Adjust the hue：
In the master mode, the hue can be adjusted by the hue / saturation / color
temperature adjustment knob or APP, and the range is RGB.
⑤ Adjusting the saturation：
n the master mode, the saturation can be adjusted by the Hue / Saturation /
Color Temperature Adjustment knob or APP, ranging from 10% to 99%.
⑥ Color temperature adjustment：
In the master mode, the color temperature can be adjusted by the hue /
saturation / color temperature adjustment knob or APP, ranging from 3200K
to 5600K.