What to do if the APP can't connect to or control GVM SD200D?
If the APP can't connect to or control your GVM Lighting Equipment, try the following: * Ensure you switch to APP mode after booting. * Verify that Bluetooth and GPS are enabled on your phone. * Open the APP and search for and connect to Bluetooth BT_LED.
What to do if GVM Lighting Equipment is on, but the display and lights are not on?
If your GVM Lighting Equipment is on but the display and lights are not, you can try to resolve the issue by restarting the product or pressing the APP switch button.
How to fix a GVM SD200D Lighting Equipment when the switch indicator does not light up?
If the switch indicator on your GVM Lighting Equipment does not light up, ensure that the adapter is properly connected to the power plug.
General| Model | SD200D |
|---|---|
| Type | LED Video Light |
| Wattage | 200W |
| Color Temperature | 3200K-5600K |
| TLCI | ≥97 |
| Dimming Range | 0-100% |
| Beam Angle | 120° |
| Cooling Method | Fan Cooling |
| CRI | ≥96 |
| Control Method | DMX |
| Power Supply | AC100-240V |
Details the connection port for the power supply.
Explains the operation of the main power switch.
Describes the screen showing operational data and status.
Functions for switching modes and adjusting lighting parameters.
Allows switching between control modes: Rotate, Slave, Master, APP.
Details data displayed: mode, brightness, color temperature, channel.
Explains control modes: Rotate, Master, Slave, and APP.
Instructions for adjusting brightness via knob or the mobile APP.
Instructions for adjusting color temperature via knob or the mobile APP.
Guide for adjusting the channel number via knob or the mobile APP.
Steps to connect and control the light using the GVM LED mobile application.
Instructions for synchronizing multiple lights or controlling slaves.
To Next Page
