APS-92r
!
&
4PS-9501U
&
APS
-
9102
ser's
Manual
5.0~-put Enabled and Disabled Operation:
Pres: the key of
'OUTPUT'.
If the indicator of output lights, the output of
APS
-
930
1
1950 119 102 is enabled. all the LED display will show the output
valur (reading value). Otherwise. the output function is disabled, and the
LED
displa); will show the setting value. Press the
'OUTPUT'
key again
to
ckange the mode.
APS
-
9301
&
APS
-
9501
U
&
APS
-
9102
ser's
Manual
6.Loc:k Function:
Presc the key of
'LOCK'.
If the indicator of lock lights, all the keys are
Locked (except the alarm reset). This function is good for avoiding any
miqtckes of key pressed during operation. Press again to change the mode.
7.Alai-m Reset:
If
thxe
is
over cun-ent happened. APS-9?01/950119102 would be shut
dowt-, and buzz immediately. You must press the key of
'ALARM
RESET'
to clear the fault of over current and stop the buzz. In addition,
the
key
of
'OUTPUT'
have to be pressed to get the normal output voltage
agai-1.
8.Mrmol~ Function:
-
-
As APS-930119501/9102 is equipped with EEPROM, the latest setting
will
>e memorized after the unit is turned off. If the APS-93011950119102
is
turned
on
again. the latest setting will
be
displayed.
9.Sa.,e/Recall Function:
b. Pr?ss the key of 'SIR'. if the indicator of
SAVEIRECALL
doesn't light,
Pi-e~i an! one of keys
'MEM1'
'MEM2'
'MEM3 and 'MEM4' for
0.2
seccnds. the current output setting will be saved. If the indicator of
SAk~ERECALL lights. press any one of keys 'MEMI' 'MEM2'
'MEM3'
and
'MEM4'
for 0.2 seconds, the setting saved last time via the same key
~vill be recalled as current setting.
To Next Page
Loading...
