GW Instek GDM-8245 - Page 29

BASIC MEASUREMENT
29
4. Connect the
test lead and
measure
There are two current terminals: MAX 2A and MAX
20A. The terminal that is used depends on the current.
For current  2A, use the MAX 2A port, for current up
to 20A use the MAX 20A port. The display updates the
reading.
≤ 20A ≤ 2A
Connect the test lead
between the 20A and COM
terminal.
Connect the test lead
between the 2A and COM
terminal.
COM
MAX
2A
COM
MAX
20A