GDM-8245 User Manual
30
Select Current range
Auto/ Manual
range
To switch between the automatic range
and the manual range, press the
UTO/MAN key.
Press the Up or Down keys to increase
or decrease the range.
Note
If AC 20A or DC 20A current ranges are selected, the
range cannot be changed with the Up or Down keys.
Switch to DCA or ACA mode first.
Selection list Range 500μA
5mA 50mA
500mA
2A 20A
Protection
Fuse protection for 500µA, 5mA, 50mA, 500mA, and 2A
ranges.
Note: To obtain accurate measurement results, please
refrain from using the 20A terminal for more than 15
seconds when measuring high current.
Note
*When the input exceeds the full scale of the selected
range, the over load “
—OL—” indicator will appear on the
display.
For more details on range, see the specifications on page
51.
To Next Page
Loading...
