GDS-806/810/820/840 Programming Manual
21
*LRN? (query only)
Returns the string that the oscilloscope settings will be listed.
Syntax
*LRN?
Returns
*OPC?
The command form (*OPC) sets the operation complete bit (bit 0) in the Standard
Event Status Register (SESR) when all pending operations finish.
The query form (*OPC?) tells the oscilloscope to place an ASCII 1 in the Output
Queue when the oscilloscope completes all pending operations.
Syntax
*OPC
*OPC?
Returns
1
To Next Page
Loading...
