GW Instek GDS-820 - Page 33

GDS-806/810/820/840 Programming Manual
32
Next table shows the relationship between the <NR3> value and matching offset
voltage.
0.002Æ2mV 0.01Æ10mV 0.1Æ100mV 1Æ1V
0.005Æ2mV 0.02Æ20mV 0.2Æ200mV 2Æ2V
0.05Æ50mV 0.5Æ500mV 5Æ5V
Returns
<NR3>
:CHANnel<X>:PROBe
Select the different probe attenuation factor.
Syntax
:CHANnel<X>:PROBe {0|1|2}
:CHANnel<X>:PROBe?
Arguments
<X>→Specify the channel number (1|2)
0→1X 1→10X 2→100X
Returns
<NR1>