GW Instek GDS-820 - Page 39

GDS-806/810/820/840 Programming Manual
38
:DISPlay:WAVeform
Select the dots (or vectors) display for data.points.
Syntax
:DISPlay:WAVeform <0|1>
:DISPlay:WAVeform?
Arguments
0→Enable vectors display 1→Enable dots display
Returns
<NR1>
:GONogo:CLEar (Available for firmware 2.0 and above only)
Clear the total and failure counter value on the screen. This command is equal to
the function key “F5” of GO/NO-GO template edit menu.
Syntax
:GONogo:CLEar
Examples
:GON:CLE clear the GO/NO-GO counter displayed.