Do you have a question about the GW Instek GOS-6112 and is the answer not in the manual?
Brand | GW Instek |
---|---|
Model | GOS-6112 |
Category | Test Equipment |
Language | English |
Identifies conditions or practices that could result in injury or loss of life.
Identifies conditions or practices that could result in damage to this product or other property.
Overview of the GOS-6112 oscilloscope's general purpose capabilities.
Details specifications for vertical deflection, sensitivity, bandwidth, and input.
Details specifications for trigger modes, source, coupling, slope, sensitivity, and level.
Details specifications for horizontal modes, sweep magnification, delay jitter, and separation.
Guidance on selecting the correct line voltage and fuse for safe operation.
Lists maximum input voltages for various terminals to prevent damage.
Controls on the front panel for waveform appearance and probe compensation.
Controls for selecting displayed signals and amplitude characteristics.
Controls for time base operation, scale, position, and magnification.
Pushbutton to select trigger mode (ATO, NML, TV).
Control knob for setting trigger input voltage and sweep start position.
Pushbutton to select trigger coupling (AC, DC, HFR, LFR).
Pushbutton to select trigger signal source (CH1, CH2, Line, EXT).
Guidance on grounding, probes, and coaxial cables for signal connection.
Procedure to check and adjust probe compensation for accurate measurements.
Procedures for replacing fuses and converting line voltage.