GW Instek GOS-620FG - Z-Axis and CRT Specifications; Function Generator Specifications

SPECIFICATION
/sensitivity
l~re~uency Bandwidth
GOS-620FG 20MHz
OSCILLOSCOPE
+ FUNCTION GENERATOR
5 Vp-p (Positive-going signal decreases intensity).
DC
- 2MHz.
Z AXIS
CALIBRATION
VOLTAGE
2.FUNCTION GENERATOR
Output Function Range
10 1 Hz - 1 MHz (7 steps)
Output Waveform
l~ine Wave. Square Wave and Triangle Wabe
CRT
IFreauencv Variable Range
110: 1 or more. I
Input resistance
Maximum lnput Voltage
Waveform
Frequency
Duty Ratio
Output Voltage
Approx.
47KR.
30V
(DC+AC peak, AC frequency51 kHz).
Positive-going Square wave.
Approx. 1 kHz.
Within 48:52.
2 Vp-p
i2%.
Output Impedance
Type
Phosphor
Acceleration Voltage
Effective Screen Size
Graticule
Trace Rotation
Square wave Unsymmetry (t3% or less (~n I kHz maximum)
Souare wave RiselFall Time
150R outuut 120n~ or less
. .
Approx. I kR
6-inch rectangular type. internal graticule.
P
31.
Approx. 2kV.
8 x 10 DIV (I DIV = lOmm (0.39in)).
Internal.
Provided.
50R
i 10%.
Output Voltage
Wcuit) continuous conversion.
DC offset possible over * 10V when opened.
1% MaxiloHz - 20kHz)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com