EasyManua.ls Logo

GW Instek GOS-620FG - Product Introduction; Description; Features

GW Instek GOS-620FG
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.
PRODUCT
INTRODUCTION
1.1
Description
The GOS-620FG oscilloscope
+
Function Generator is a portable-type, dual-channel oscilloscope with function generator.
Its bandwidth of DC is up to 20MHz, and its maximum sensitivity is ImVIDIV. The time base provides a maximum
sweep time of 0.2uSIDIV. The sweep speed becomes 100nSIDIV after magnifying 10 times. The oscilloscope uses a
6-inch rectangular type cathode-ray tube with red internal graticule. The Function Generator generates triangle wave, sine
wave, and square wave with the frequency range from 0.1 Hz to I MHz.
The product is sturdy, easy to operate and exhibits high operational reliability.
1.2 Features
1) High intensity CRT with high acceleration voltage:
The CRT is a high beam transmission and high intensity type with
a
high acceleration voltage of 2kV. It displays readable
traces clearly even at high sweep speeds.
2)
Wide bandwidth and sensitivity:
In addition to wide bandwidth, DC-20MHz (-3dB), the instrument provides high sensitivity of 5mVIDIV (ImVIDIV at
X
5
MAG).
A
20MHz frequency is obtained with improved triggering synchronization.
3) Alternate triggering:
Even with an observation of two different frequency waveforms, each waveform can be triggered stably
4)
TV sync triggering:
The oscilloscope has a sync separator circuit for TV-V and TV-H signals triggering.
5) CHI Output:
A
signal from
50Q
output terminal of CHI located on rear panel can be applied to frequency counteror other instruments.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Related product manuals