6)
Z-Axis Input:
Intensity modulation capability permits time or frequency markers to be added. Trace blank with positive signal, TTL
compatible.
7)
X-Y operation:
Set
the switch to
X-Y
to operate the instrument as an X-Y oscilloscope.
CHI
can be applied as a horizontal deflection (X-axis)
while
CH2
provides vertical deflection (Y-axis).
8)
Built-in Function Generator with BNC output of
50
'2.
9)
Three kinds of waveforms are available with
50R
output.
10)Waveform frequency
is
up to
I
MHz.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
