FOR UNITED KINGDOM ONLY
NOTE
This leadlappliance must only
be wired by competent persons
WARNING
THIS APPLIANCE
MUST
BE
EARTHED
IMPORTANT
The wires in this lead are
coloured in accordance with
the following code:
Green1
Yellow: Earth
Blue: Neutral
Brown:
Live(Phase)
As the colours of the wires in main leads may not correspond with the colours
marking identified in your plugiappliance, proceed as follows:
The wire which is coloured Green
&
Yellow must be connected to the Earth terminal
marked with the letter E or by the earth symbol
@
or coloured Green or Green
&
Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked
with the letter
N
or coloured
Blue
or Black.
The wire which is coloured Brown must be connected to the terminal marked with the
letter
L
or
P
or coloured Brown or Red.
If in doubt, consult the instructions provided with the equipment or contact the supplier.
This
cable/appliance should be protected by a suitably rated and approved HBC mains
fuse
:
refer to the rating information on the equipment andlor user instructions for
details. As a guide, cable of 0.75mmz should be protected by a 3A or 5A hse. Larger
conductors would normally require 13A types, depending on the connection method
used.
Any moulded mains connector that requires
removal/replacement must be destroyed
by removal of any hse
&
fuse carrier and disposed immediately, as a plug with bared
wires is hazardous if a engaged in live socket. Any re-wiring must be carried out in
accordance with the information detailed on this label.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
