This command can be used to terminate a remote
session. When this command is used “RMT” will
no longer be displayed on the front panel,
indicating that remote mode has been terminated.
This special function is not a command. When in
remote mode, the GPT-9000 will send the message,
“Inter Lock Key Open” if a test is started with
INTERLOCK set to ON, but the interlock signal
I/O pins are not shorted (either with the included
interlock key or manually).
This special function is analogous to the
“INTERLOCK OPEN”message that is displayed on
the front panel under the same conditions (page
104).
To Next Page
Loading...
Need help?
General
