Need help?Do you have a question about the GW Instek PSP-405 and is the answer not in the manual?
General| Output Voltage | 0-40V |
|---|---|
| Output Current | 0-5A |
| Power Rating | 200W |
| Load Regulation (CV) | <0.01% + 3mV |
| Line Regulation (CV) | <0.01% + 3mV |
| Over Voltage Protection (OVP) | Yes |
| Over Current Protection (OCP) | Yes |
| Resolution Voltage | 10mV |
| Resolution Current | 1mA |
| Output Channels | 1 |
| Total Power | 200W |
| Voltage Accuracy | <0.05% + 10mV |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -10°C to 70°C |
| Ripple and Noise (CV) | < 1mVrms / < 3mVpp |
| Ripple and Noise (CC) | ≤3mArms |
| Load Regulation (CC) | < 0.1% + 3mA |
| Line Regulation (CC) | < 0.1% + 3mA |
Provides critical precautions for safe operation, handling, and environment.
Guides the user through the initial power-up and connection procedures for the power supply.
Details how to set the maximum voltage output limit for the power supply.
Explains the procedure for setting the maximum current output limit.
Guides on configuring the maximum power output limit for the device.
Defines the structure and rules for writing remote control commands.
Lists and describes various commands available for controlling the power supply remotely.
To Next Page