光毓机电 RMD-X8
V1.0
before use.
Driver download address：http://www.gyems.cn/support/download
After the download is complete, unzip it and double-click to start the installation until it is
complete. Then insert the USB data cable, you can see whether the installation is
successful in the Windows device manager. The corresponding COM port can be found in
the figure below, indicating the installation is successful.
4.2 Hardware Connection
Power supply voltage adjust to 48v (the power supply with fixed 48v output is better).
Turn off the power button before connecting the motor, as shown in the following figure:
To Next Page
Loading...
Need help?
General