光毓机电 RMD-X8
V1.0
Transport and storage conditions
Please ensure that products are not subject to more than permitted burdens during
transportation and storage, including
—Mechanical load
—Unacceptable temperature
—Moisture
—Corrosive gas
Please use the original packing for storage and transportation. The original packing
provides enough protection to avoid regular problems.
Technical requirements
General conditions for correct and safe use of products must be complied with:
The technical requirements for the connection and environment conditions specified in
the product technical data and for all other connected components. Only if the product
meets the requirements of motor specification, it is allowed to operate the product in
accordance with the relevant safety procedures.
Please follow the instructions and warnings in this document.
Operator requirements
This product can only be operated by engineers who are familiar with the following
rules:
—Familiar with installation and operation of electrical control system.
—Familiar with applicable provisions for operational safety engineering systems.
—Familiar with applicable provisions for accident protection and occupational safety.
—Familiar with product document on provisions.
2.2 Environmental Conditions
Environment temperature -20℃～ 50 ℃（Not freeze）.
Environmental humidity5～95%RH （Without condensation）.
Storage temperature 10 ℃～ 70 ℃（Not freeze）.
Storage humidity 5～95%RH（Without condensation）.
Installation requirements no insolation, corrosive gas and fuel dust.
Altitude below 1000m.
The vibration is 10 ~ 60Hz below 5.9 m/s
2
.
To Next Page
Loading...
Need help?
General