What to do if GYS Battery Charger won't charge the battery?
If your GYS Battery Charger is plugged in but not charging, there could be several reasons: * A blown fuse: Replace the fuse, making sure to use the correct value. * Poor clamp connection: Clean both the battery terminals and the charger clamps, and inspect the cables for damage. * Incorrect charge setting: Ensure the charge position matches the battery voltage.
Why does the fuse break as soon as I change it on my GYS Battery Charger?
If the fuse in your GYS Battery Charger breaks immediately after replacement, consider these possibilities: 1. Polarity reversal: Ensure the positive (+) clamp is connected to the positive (+) terminal of the battery, and the negative (–) clamp is connected to the negative (–) terminal. 2. Vehicle starting: Avoid attempting to start the vehicle while the charger is connected. 3. Incorrect charge setting: Verify that the charge position is appropriate for the battery voltage. 4. Current draw on the battery: Do not charge the battery while it is connected to the vehicle.
General| Fuse | 16 A |
|---|---|
| Protection class | IP21 |
| Dimensions | 30 x 12 x 23.5 cm |
| Weight | 4.7 kg |
| Mains voltage | 230 V |
| Input voltage | 230 V |
To Next Page
