H3C MSR Series User Manual

6
Field Descri
p
tion
Notified
Number of notification packets sent to the POS terminal when application mapping
failures or forward failures occur.
Related commands
reset posa statistics
display posa status app
Use display posa status app to view POS application state information.
Syntax
display posa status app [ app-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
app-id: Specifies a POS application template by its ID, in the range of 1 to 31. If no application template
is specified, the command displays state statistics for all POS application templates.
Examples
# Display state information for all POS application templates.
<Sysname> display posa status app
AppID Type Mode Interface IPAddr:Port State
1 TCP Temporary - 192.168.7.254:1000 linked
2 TCP Temporary - 192.168.7.224:1000 Error
3 Flow - Asy1/0 - Down
9 TCP Normal - 192.168.4.1:20 Unlinked
11 TCP Normal - 192.4.5.5:111 Unlinked
30 TCP Temporary - 192.168.7.52:4000 Multilink(10)
31 Flow - - - -
Table 4 Command output
Field Descri
p
tion
AppID ID of the POS application template.
Type Connection mode of the POS application template: flow or TCP.
Mode
TCP connection mode of the POS application template:
• Normal—Permanent TCP connection mode.
• Temporary—Temporary TCP connection mode.
For the flow mode, this field displays a hyphen (-).

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS