H3C MSR Series

2
Use undo caller-number enable to disable sending of the caller number.
Syntax
caller-number enable
undo caller-number enable
Default
Sending of the caller number is disabled.
Views
POS application template view
Predefined user roles
network-admin
Usage guidelines
This function is supported only for AM POS terminal devices.
This function takes effect only when the application template is configured in temporary TCP connection
mode.
Examples
# Configure POS application template 1 in TCP mode. Enable sending of the caller number.
<Sysname> system-view
[Sysname] posa app 1 type tcp
[Sysname-posa-app1] mode temporary
[Sysname-posa-app1] caller-number enable
description
Use description to set a description for a POS application template.
Use undo description to delete the description.
Syntax
description text
undo description
Default
No description is set for a POS application template and the POS application template is displayed on
the MIB management platform as an empty string.
Views
POS application template view
Predefined user roles
network-admin