19
Usage guidelines
You can set a description for a POS terminal template before creating the POS terminal template.
Examples
# Set the description of POS terminal template 1 as shopping1.
<Sysname> system-view
[Sysname] posa terminal 1 description shopping1
Related commands
posa terminal
reset posa connection terminal
Use reset posa connection terminal to disconnect TCP connections between the router and POS terminal
devices.
Syntax
reset posa connection terminal { all | destination-ip ip-addr2 | destination-port port-number | source-ip
ip-addr1 }
Views
User view
Predefined user roles
network-admin
Parameters
all: Disconnects all TCP connections between the router and POS terminal devices.
destination-ip ip-addr2: Specifies a destination IP address.
destination-port port-number: Specifies a destination port number in the range of 1 to 65535.
source-ip ip-addr1: Specifies a source IP address.
Usage guidelines
This command disconnects a single or multiple TCP connections based on the specified source IP address,
destination IP address, and destination port number.
The number of disconnections is also displayed when you execute this command.
Examples
# Disconnect all TCP connections between the router and POS terminal devices.
<Sysname> reset posa statistics
100 connections have been deleted.
reset posa statistics
Use reset posa statistics to clear statistics for a POS application template or terminal template.
Syntax
reset posa statistics [ app [ app-id ] | terminal [ terminal-id ] ]
To Next Page
Loading...
Need help?
General
