H3C MSR Series User Manual

26
Predefined user roles
network-admin
Parameters
destination: Changes the TPDU destination addresses of packets.
source: Changes the TPDU originator addresses of packets.
Usage guidelines
The TPDU address change policy can either change the originator or destination TPDU address, but not
both. The most recent configuration overwrites the previous one.
FEPs require the change of either the originator or destination address in the TPDU field. Determine the
TPDU address change policy according to the requirements of FEPs.
In nontransparent mode, modifying the TPDU address change policy also removes all permanent TCP
connections governed by the application template.
Examples
# Configure the router to change the TPDU destination address of packets sent to the FEP that
corresponds to POS application template 1. The application template 1 uses permanent TCP connections
in nontransparent mode.
<Sysname> system-view
[Sysname] posa app 1 type tcp
[Sysname-posa-app1] tpdu-change destination
Connections for the application have been reset

H3C MSR Series Specifications

General

Category	Network Router
IPv6 Support	Yes
Dimensions	Varies by model
Weight	Varies by model
Product Type	Modular Router
Ports	Varies by model
WAN Interfaces	Varies by model
Firewall	Yes
QoS	Yes
Wireless Support	Varies by model
USB Ports	Varies by model
Console Port	Yes
Power Supply	Varies by model
Redundancy	Varies by model
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to 70°C
Humidity	5% to 95% non-condensing
Series	MSR
Certifications	CE, FCC, RoHS