H3C MSR3600 - Page 50

1-43
LED State Description
610-XS/MSR3610-X
1-DP/MSR3610-X1-
DC/MSR3610-X1-DP
-DC)
Flashing green (8 Hz) The BootWare is running.
Steady green The SDRAM is performing self-test.
Flashing yellow (1 Hz) The DDR3 SDRAM has failed the self-test.
Flashing yellow (8 Hz) The BootWare extended segment does not exist.
Steady yellow The boot image does not exist.
Off No power input, or exceptions have occurred.
Flashing yellow at 8 Hz
for 5s
USB-based automatic configuration has succeeded.
Flashing yellow at 8 Hz
for 10s
USB-based automatic configuration has failed.
SYS (applicable to
MSR3620-X1/MSR3
620-X1-XS/MSR364
0-X1/MSR3640-XS/
MSR3640-X1-HI/MS
R3660-XS)
Flashing green (8 Hz) The BootWare is running.
Steady green The Kernel (including Eshell) is running.
Flashing green (0.5 Hz) Comware has started with the configuration file and the
router has booted up.
Flashing yellow (0.5 Hz) The memory test has failed.
Flashing yellow (8 Hz) The extended segment does not exist.
Steady yellow The boot.bin file does not exist.
Off No power input, or exceptions have occurred.
SYS (applicable to
MSR3610E-X1/MSR
3610E-X1-DP/MSR3
600-28-G-DP/MSR36
00-51-G-DP/MSR364
0-G)
Flashing green (8 Hz) The BootWare is running.
Steady green The Kernel (including Eshell) is running.
Flashing green (1 Hz) Comware has started with the configuration file and the
router has booted up.
Flashing yellow (1 Hz) The memory test has failed.
Flashing yellow (8 Hz) The extended segment does not exist.
Steady yellow The boot.bin file does not exist.
Off No power input, or exceptions have occurred.
PWR
Steady green The power supply is operating correctly.
Steady yellow
The power supply is not in position or is operating
incorrectly.
Off The MPU has failed or no power input.
PoE
Steady green The power supply is operating correctly.
Steady yellow
The internal power supply for at least one PoE has failed
or no power supply for the PoE port.
Off No power input.
CF card LED
Steady green An inserted CF card has passed the detection.
Flashing green
The system is accessing the CF card. The CF card
cannot be removed.
Steady yellow An inserted CF card did not pass the detection.
Off
No CF card is inserted or the inserted CF card cannot be
identified.