H3C MSR3600 - Slot Arrangement and Interface Numbering

1-45
LED State Description
Flashing yellow
Data is being received or transmitted at 100 Mbps. (Not
supported on the MSR3610-G/MSR3620-G router.)
Off No link is present.
SFP (applicable to
MSR3610-X1/MSR3
610-XS/MSR3610-X
1-DP/MSR3610-X1-
DC/MSR3610-X1-DP
-DC)
Steady green A 1000 Mbps link is present.
Flashing green Data is being received or transmitted at 1000 Mbps.
Steady yellow A 10/100 Mbps link is present.
Flashing yellow Data is being received or transmitted at 10/100 Mbps
Off No link is present.
SFP+
Steady green A 10 Gbps link is present.
Flashing green Data is being received or transmitted at 10 Gbps.
Steady yellow A 1000 Mbps link is present.
Flashing yellow Data is being received or transmitted at 1000 Mbps.
Off No link is present.
SFP+ (applicable to
MSR3600-28-G-DP/
MSR3600-51-G-DP)
Steady green A 10 Gbps link is present.
Flashing green Data is being received or transmitted at 10 Gbps.
Steady yellow A 100/1000 Mbps link is present.
Flashing yellow Data is being received or transmitted at 100/1000 Mbps.
Off No link is present.
SFP28
Steady green A 25 Gbps link is present.
Flashing green Data is being received or transmitted at 25 Gbps.
Steady yellow A 10 Gbps link is present.
Flashing yellow Data is being received or transmitted at 10 Gbps.
Off No link is present.
CTRL
Steady green
A WebSocket connection is present between the device
and controller.
Flashing yellow The router is connecting to the controller.
Off No link is present between the router and controller.
Slot arrangement and interface numbering
The MSR3600-28-SI/MSR3600-28-SI-GL/MSR3600-51-SI/MSR3610E-X1/MSR3610E-X1-DP
router does not support IRF.
The MSR 3600 router provides slots for SICs and HMIMs. On the MSR 36-20/MSR 36-40/MSR
36-60 router, you can combine two SIC slots into one DSIC slot by removing the slot divider.
The slot number of all fixed ports on the router panel is Slot 0.