H3C S5170-EI Series Hardware Information

Table4-6 FE SFP transceiver modules available for the SFP ports
FE SFP transceiver
module
Central
wavelength
(nm)
Connector
Fiber diameter
(µm)
Max
transmission
distance
SFP-GE/FE-LX10-SM1310 1310 LC
Single-mode,
9/125
10 km (6.21 miles)
SFP-FE-SX-MM1310-A 1310 LC
Multi-mode,
50/125
2 km (1.24 miles)
Multi-mode,
62.5/125
SFP-FE-LX-SM1310-A 1310 LC
Single-mode,
9/125
15 km (9.32 miles)
SFP-FE-LX-SM1310-D 1310 LC
Single-mode,
9/125
15 km (9.32 miles)
SFP-FE-LH40-SM1310 1310 LC
Single-mode,
9/125
40 km (24.86 miles)
SFP-FE-LH80-SM1550 1550 LC
Single-mode,
9/125
80 km (49.71 miles)
SFP-FE-LX-SM1310-BIDI
TX: 1310
RX: 1550
LC
Single-mode,
9/125
15 km (9.32 miles)
SFP-FE-LX-SM1550-BIDI
TX: 1550
RX: 1310
LC
Single-mode,
9/125
15 km (9.32 miles)
IMPORTANT:
T
he SFP-FE-LX-SM1310-BIDI and SFP-FE-LX-SM1550-BIDI
transceiver modules must be used in
pairs. For example, if one end uses the
SFP-FE-LX-SM1310-BIDI
transceiver module, the other end
must use the SFP-FE-LX-SM1550-BIDI transceiver module.
SFP+ port
Table4-7 SFP+ port specifications
Item Specification
Interface type SFP+ port
Compatible transceiver
modules and cables
• GE SFP transceiver modules and cables in Table4-8
• 10-GE SFP+ transceiver modules and cables in Table4-9, Table4-10, and
Table4-11
Compatible devices All device models
Restrictions and
guidelines
You can install a maximum of two 10-GE transceiver modules with a
transmission distance of 80 km (49.71 miles).

H3C S5170-EI Series Specifications

General

Brand	H3C
Model	S5170-EI Series
Category	Switch
Language	English