43
Command Description
display packet-filter
Displays whether an ACL has been successfully applied to an
interface for packet filtering.
display qos policy
Displays user-defined QoS policy configuration information.
display qos policy interface
Displays information about the QoS policies applied to an
interface or all interfaces.
display qos vlan-policy
Displays information about QoS policies applied to VLANs.
display qos policy global
Displays information about global QoS policies.
display this
Displays the running configuration in the current view.
display ip source
binding
/
display ipv6 source
binding
Displays source guard binding entries.
display portal interface
Displays portal configuration and portal running state on an
interface.
display dot1x
Displays information about 802.1X.
display link-aggregation
verbose
Displays detailed information about the aggregation groups that
correspond to the aggregate interfaces.
display smart-link group
Displays information about the specified or all smart link groups.
display mac-address blackhole
Displays blackhole MAC address entries.
display qos lr interface
Displays the rate limit configuration and statistics on a specified
interface or all the interfaces.
display qos queue-statistics
interface
Displays traffic statistics collected for an interface on a per-queue
basis.
Layer 3 forwarding failure
Symptom
Packet loss occurs when the switch forwards packets to a different network.
To Next Page
Loading...
Need help?
General