H3C SecPath F1000-AI-5 Series User Manual

5
Security policy
As shown in Figure 4, a security policy filters packets based on the specified filtering conditions
such as source/destination security zone, source IP/MAC address, destination IP address, service,
application, terminal, user, and time period. It processes matched packets according to the pre-set
policy action. If a packet does not match any policy, it will be discarded. If no filtering conditions are
configured in the security policy, the policy matches all packets.
Figure 4 Packet processing of security policy
Configuring basic firewall settings
Obtaining the factory default settings
Table 1 shows the factory default settings of the device. You can also obtain the default username
and password of the device through the nameplate on the device.
Table 1 Factory default settings of the device
Item
Default
Remarks
Username admin N/A
Password admin N/A
Login type
• Device login from the Web interface
• Device login from the console port
Configure other login types
as needed.
IP address of
the Ethernet
management
interface
• Interface: GigabitEthernet 1/0/0 or
M-GigabitEthernet 1/0/0
• IP address: 192.168.0.1/24
The management interface
varies by device model. For
more information, see the
product manuals or the
nameplate on the device.

H3C SecPath F1000-AI-5 Series Specifications

General

Brand	H3C
Model	SecPath F1000-AI-5 Series
Category	Firewall
Language	English