Need help?Do you have a question about the H3C SecPath Series and is the answer not in the manual?
General| Category | Firewall |
|---|---|
| Weight | Varies by model |
| Model | SecPath Series |
| Throughput | Varies by model |
| Concurrent Sessions | Varies by model |
| VPN Support | Yes |
| High Availability | Yes |
| Interfaces | Varies by model |
| Application Identification | Yes |
| Intrusion Prevention System (IPS) | Yes |
| VPN Throughput | Varies by model |
| New Sessions Per Second | Varies by model |
| Power Supply | Varies by model |
| Dimensions | Varies by model |
| Operating Temperature | Varies by model |
| Storage Temperature | Varies by model |
| Humidity | 5% to 95% (non-condensing) |
| Certifications | Varies by model |
Identifies the intended readers of the documentation.
Explains command syntax and GUI conventions used in the document.
Overview of the H3C SecPath series high-end firewalls documentation.
Instructions for accessing H3C product documentation online.
Contact information for technical assistance and support.
Channel for providing comments and feedback on the documentation.
Command to convert dynamic ARP entries into static ARP entries.
Command to enable ARP automatic scanning for network neighbors.
Displays information about ActiveX blocking status and keywords.
Displays information about Java blocking status and keywords.
Displays URL address filtering information and status.
Displays URL parameter filtering information and status.
Configure ACL, enable, and set suffixes for ActiveX blocking.
Configure ACL, enable, and set suffixes for Java blocking.
Configure ACL, default action, IP address support, load, save, URL addresses.
Configure parameter filtering entries, enable, load, and save.
Clears statistics for ActiveX, Java, URL host, and URL parameter filtering.
To Next Page
