H3C SecPath Series

18
Description
Use the firewall http url-filter parameter enable command to enable the URL parameter filtering function.
Use the undo firewall http url-filter parameter enable command to disable the URL parameter filtering
function.
By default, the URL parameter filtering function is disabled.
Related commands: display firewall http url-filter parameter.
Examples
# Enable the URL parameter filtering function.
<Sysname> system-view
[Sysname] firewall http url-filter parameter enable
firewall http url-filter parameter load
Syntax
firewall http url-filter parameter load file-name
undo firewall http url-filter parameter load
View
System view
Default level
2: System level
Parameters
file-name: Name of the file storing the parameter filtering entries. The name must contain the file path.
Description
Use the firewall http url-filter parameter load command to configure the firewall to load a URL parameter
filtering file at restart.
Use the undo firewall http url-filter parameter load command to cancel the configuration.
Related commands: display firewall http url-filter parameter.
Examples
# Specify to load the parameter filtering entries in a file at restart.
<Sysname> system-view
[Sysname] firewall http url-filter parameter load cfa0:/parameterfilter
firewall http url-filter parameter save
Syntax
firewall http url-filter parameter save file-name
View
System view
Default level
2: System level