H3C SecPath Series User Manual

8
firewall http activex-blocking acl
Syntax
firewall http activex-blocking acl acl-number
undo firewall http activex-blocking acl
View
System view
Default level
2: System level
Parameters
acl-number: ACL number, in the range 2000 to 3999.
Description
Use the firewall http activex-blocking acl command to specify an ACL for ActiveX blocking.
Use the undo firewall http activex-blocking acl command to cancel the configuration.
By default, no ACL is specified for ActiveX blocking.
After the command takes effect, all Web requests containing any suffix keywords in the ActiveX blocking
suffix list will be processed according to the ACL.
You can specify multiple ACLs for ActiveX blocking, but only the last one takes effect.
You can specify a non-existing ACL, but ActiveX blocking based on the ACL takes effect only after you
create and configure the ACL correctly.
Related commands: display firewall http activex-blocking.
Examples
# Specify the ACL for ActiveX blocking as ACL 2003.
<Sysname> system-view
[Sysname] firewall http activex-blocking acl 2003
firewall http activex-blocking enable
Syntax
firewall http activex-blocking enable
undo firewall http activex-blocking enable
View
System view
Default level
2: System level
Parameters
None

H3C SecPath Series Specifications

General

Category	Firewall
Weight	Varies by model
Model	SecPath Series
Throughput	Varies by model
Concurrent Sessions	Varies by model
VPN Support	Yes
High Availability	Yes
Interfaces	Varies by model
Application Identification	Yes
Intrusion Prevention System (IPS)	Yes
VPN Throughput	Varies by model
New Sessions Per Second	Varies by model
Power Supply	Varies by model
Dimensions	Varies by model
Operating Temperature	Varies by model
Storage Temperature	Varies by model
Humidity	5% to 95% (non-condensing)
Certifications	Varies by model