H3C SecPath Series User Manual

7
Description
Use the display firewall http url-filter parameter command to display information about URL parameter
filtering.
If no parameters are specified, the command displays brief information about URL parameter filtering.
Examples
# Display brief information about URL parameter filtering.
<Sysname> display firewall http url-filter parameter
URL-filter parameter is enabled.
# Display URL parameter filtering information about a specified keyword.
<Sysname> display firewall http url-filter parameter item ^select$
The HTTP request packet including "^select$" had been matched for 10 times.
# Display URL parameter filtering information about all keywords.
<Sysname> display firewall http url-filter parameter all
SN Match-Times Keywords
----------------------------------------------
1 0 ^select$
2 0 ^insert$
3 0 ^update$
4 0 ^delete$
5 0 ^drop$
6 0 --
7 0 ‘
8 0 ^exec$
9 10 %27
10 0 qqqqq
Table 5 Output description
Field Description
SN Serial number
Match-Times Number of times that the keyword has been matched
Keywords URL parameter filtering keyword
# Display detailed information about URL parameter filtering.
<Sysname> display firewall http url-filter parameter verbose
URL-filter parameter is enabled.
URL-filter parameter has loaded file “cfa0:/parameterfilter”.
There are 10 packet(s) being filtered.
There are 0 packet(s) being passed.

H3C SecPath Series Specifications

General

Category	Firewall
Weight	Varies by model
Model	SecPath Series
Throughput	Varies by model
Concurrent Sessions	Varies by model
VPN Support	Yes
High Availability	Yes
Interfaces	Varies by model
Application Identification	Yes
Intrusion Prevention System (IPS)	Yes
VPN Throughput	Varies by model
New Sessions Per Second	Varies by model
Power Supply	Varies by model
Dimensions	Varies by model
Operating Temperature	Varies by model
Storage Temperature	Varies by model
Humidity	5% to 95% (non-condensing)
Certifications	Varies by model