H3C SecPath Series User Manual

13
<Sysname> system-view
[Sysname] firewall http url-filter host default permit
firewall http url-filter host enable
Syntax
firewall http url-filter host enable
undo firewall http url-filter host enable
View
System view
Default level
2: System level
Parameters
None
Description
Use the firewall http url-filter host enable command to enable the URL address filtering function.
Use the undo firewall http url-filter host enable command to disable the URL address filtering function.
By default, the URL address filtering function is disabled.
Related commands: display firewall http url-filter host.
Examples
# Enable the URL address filtering function.
<Sysname> system-view
[Sysname] firewall http url-filter host enable
firewall http url-filter host ip-address
Syntax
firewall http url-filter host ip-address { deny | permit }
View
System view
Default level
2: System level
Parameters
permit: Specifies to permit a Web request whose destination URL is present in IP address.
deny: Specifies to deny a Web request whose destination URL is present in IP address.
Description
Use the firewall http url-filter host ip-address command to enable/disable support for IP address in URL
address filtering, that is, to permit or deny Web requests using IP addresses for access to websites.
By default, the URL address filtering function denies Web requests using IP addresses for access to
websites.

H3C SecPath Series Specifications

General

Category	Firewall
Weight	Varies by model
Model	SecPath Series
Throughput	Varies by model
Concurrent Sessions	Varies by model
VPN Support	Yes
High Availability	Yes
Interfaces	Varies by model
Application Identification	Yes
Intrusion Prevention System (IPS)	Yes
VPN Throughput	Varies by model
New Sessions Per Second	Varies by model
Power Supply	Varies by model
Dimensions	Varies by model
Operating Temperature	Varies by model
Storage Temperature	Varies by model
Humidity	5% to 95% (non-condensing)
Certifications	Varies by model