H3C SecPath Series

19
Parameters
file-name: Name of the file for storing the parameter filtering entries. The name must contain the file path.
Description
Use the firewall http url-filter parameter save command to save all the parameter filtering entries
(including the default ones) into a specified file.
Examples
# Save all the parameter filtering entries into a file.
<Sysname> system-view
[Sysname] firewall http url-filter parameter save cfa0:/parameterfilter
reset firewall http
Syntax
reset firewall http { activex-blocking | java-blocking | url-filter host | url-filter parameter } counter
View
User view
Default level
1: Monitor level
Parameters
activex-blocking: Specifies ActiveX blocking statistics.
java-blocking: Specifies Java blocking statistics.
url-filter host: Specifies URL address filtering statistics.
url-filter parameter: Specifies URL parameter filtering statistics.
counter: Specifies to clear statistics.
Description
Use the reset firewall http command to clear Web filtering statistics.
Examples
# Clear URL address filtering statistics.
<Sysname> reset firewall http url-filter host counter