H3C SecPath F1000-AI-5 Series User Manual

2
F100 series
F100 series
Models
F100-C-A series
F100-C-A6-WL, F100-C-A5-W, F100-C-A3-W, F100-C-A6, F100-C-A5, F100-C-A3,
F100-C-A1, F100-C-A2
Chassis views
The chassis views vary by firewall model. For more information about the chassis views, see the
installation guide for the product. This section uses the F100-C-A1 firewall as an example.
Front panel
The F100-C-A1 firewall provides the following ports on the front panel:
•
Two 1000BASE-X Ethernet fiber ports.
•
Five 10/100/1000BASE-T autosensing Ethernet copper ports (including one management
Ethernet port).
•
One USB port.
•
One console port.
•
One Micro SD card slot.
Figure 1 Front panel
(1) 10/100/1000BASE-T copper ports
(2) 1000BASE-X fiber ports
(3) Console port
(4) USB port (host mode, Type A)
(5) Micro SD card slot
(6) Reset button
(7) DC-input power receptacle
(8) Micro SD card, system status (SYS), and power
status (PWR) LEDs
(9) 1000BASE-X fiber port LED
(10) 10/100/1000BASE-T Ethernet copper port LED
(11) Management Ethernet port (MGMT)
NOTE:

H3C SecPath F1000-AI-5 Series Specifications

General

Brand	H3C
Model	SecPath F1000-AI-5 Series
Category	Firewall
Language	English