H3C SecPath F5030 Configuration Guide

9
controller cellular interface-number
3. Enable PIN verification.
pin verification enable [ pin ]
The default setting depends on the modem model.
Whether you are required to enter the PIN when enabling PIN verification depends on the
modem model.
4. Specify the PIN for verification.
pin verify { cipher | simple } string
By default, no PIN is configured on a device for 3G/4G modem verification.
This command saves the PIN on the device.
5. (Optional.) Specify a PUK to unlock the SIM/UIM card.
pin unlock puk new-pin
After the SIM/UIM card is unlocked, execute the pin verify command to save the new PIN
on the device.
6. (Optional.) Modify the PIN of the SIM/UIM card.
pin modify current-pin new-pin
The new PIN is saved in the SIM/UIM card.
After the PIN is modified, execute the
pin verify command to save the new PIN on the
device.
Configuring DM
NOTE:
Support for DM depends on the modem model.
About DM
Diagnostic and monitoring (DM) allows third-party debugging tools to diagnose and monitor the
3G/4G modem through cellular interface debugging output. For more information about DM, see
related 3G/4G modem user manuals.
Procedure
1. Enter system view.
system-view
2. Enter cellular interface view.
controller cellular interface-number
3. Enable DM.
dm-port open
The default setting for this command depends on the modem model.
Setting the RSSI thresholds
About setting the RSSI thresholds
After setting the RSSI thresholds, you will stay informed about the RSSI changes.
Procedure
1. Enter system view.

H3C SecPath F5030 Specifications

General

Brand	H3C
Model	SecPath F5030
Category	Firewall
Language	English