H3C SecPath F5030 Configuration Guide

15
By default, PPP accounting is disabled.
Display and maintenance commands for PPP
Execute display commands in any view and reset commands in user view.
Task Command
Display PPP address pools.
display ip pool
[ pool-name |
group
group-name ]
Display information about PPP access users.
display ppp access-user
{
domain
domain-name
|
interface
interface-type
interface-number
[
count
] |
ip-address
ipv4-address |
ipv6-address
ipv6-address |
username
user-name |
user-type
{
lac
|
lns
|
pppoa
|
pppoe
}
[
count
] }
Display IPHC statistics.
display ppp compression iphc
{
rtp
|
tcp
} [
interface
interface-type
interface-number
]
Log off a PPP user.
reset ppp access-user
{
ip-address
ipv4-address [
vpn-instance
ipv4-vpn-instance-name ] |
ipv6-address
ipv6-address [
vpn-instance
ipv6-vpn-instance-name ] |
username
user-name }
Clear IPHC statistics.
reset ppp compression iphc
[
rtp
|
tcp
]
[
interface
interface-type
interface-number
]

H3C SecPath F5030 Specifications

General

Brand	H3C
Model	SecPath F5030
Category	Firewall
Language	English