12
4. Press ESC or DEL.
The BIOS setup screen opens.
5. Select the Sava & Exit menu, as shown in Figure 14.
Figure 14
BIOS setup screen
6. Select UEFI:AMI Virtual CDROM0 1.00 and press Enter.
The upgrade options screen opens, as shown in Figure 15.
Figure 15
Upgrade options screen
7. Type 1 and press Enter.
IMPORTANT:
Do not remove the boot media during the upgrade process. If the boot media is removed before
the upgrade completes, you must re-attach the boot media to the server, reboot the server, and
restart the upgrade process.
8. After the upgrade is complete, type yes and press Enter at the system prompt.
To Next Page
Loading...
Need help?
General
