48
1. On the PMC RAID management screen, select Logical Device Configuration, and press
Enter.
2. On the screen as shown in Figure 81, select Select Boot Device, and press Enter.
Figure 81 Logical Device Configuration screen
3. On the screen as shown in Figure 82, navigate to the drive to be used as the boot device,
press Insert to select the drive, and press Enter.
Figure 82 Selecting a drive
Deleting RAID arrays
1. On the PMC RAID management screen as shown in Figure 83, select Logical Device
Configuration, and press Enter.
To Next Page
Loading...
Need help?
General
