H3C UniServer R4950 G3 User Manual

5
Accessing the RSTe configuration screen
1. Access the BIOS setup screen.
2. On the screen as shown in Figure 5, select Advanced > Intel(R) VROC SATA Controller or
Intel(R) VROC sSATA Controller, and press Enter.
NOTE:
For the
Intel(R) VROC SATA Controller or Intel(R) VROC sSATA Controller option to
appear on the
screen shown in Figure 5, make sure the SATA or sSATA controller has been
configured to operate in RAID mode. For how to set the operating mode, see "
Setting the
RSTe operating mode."
Figure 5 Advanced screen
The RSTe configuration screen as shown in Figure 6 opens.

H3C UniServer R4950 G3 Specifications

General

Brand	H3C
Model	UniServer R4950 G3
Category	Server
Language	English