1-2
Feature Description
Ethernet Port
The Ethernet port provides a 10/100/1000
BASE-T Ethernet connection to a switch. Use
a suitable Category 5 cable with
straight-through wiring and standard RJ-45
connectors to connect your AP to the network.
LEDs
The LEDs indicate power and activity. See
Checking the LED Indicators for details.
Antenna
Connectors
The AP has three built-in internal antennas. In
addition, three RSMA antenna connectors
allow you to connect optional external
antennas.
Reset Button To reset the AP.
RJ-45 Console
Port
Provides a serial interface to the AP for
diagnostic use. Default: 9600K, 8 bits, no
parity, 1 stop bit.
Wall-Mounting
Bracket and
Table-Top Stand
The combined wall-mounting bracket and
table-top stand allows you to mount the unit on
a wall or stand it on a table top.
To Next Page
Loading...
