2-1
2 Mounting the AP
Unpacking the AP
Make sure that you have the following items, which are included with
the AP:
z One H3C WA2620-AGN Access Point
z Wall-mounting hardware:
z One combined wall-mounting bracket and table-top stand
z Four screws
z Four wall anchors
z Suspended ceiling bracket:
z One ceiling bracket
z One slider
z Two screws
z Eight adhesive rubber feet
z One copy of this Quick Start Guide
z One H3C Warranty Flyer
z One console cable
Preparing for Installation
H3C recommends that you connect and check the Ethernet cable and
LEDs before you install the AP in a hard-to-reach location. Also,
observe these items before you mount or connect the AP:
To Next Page
Loading...
