Haaga 697 - 8.2 Fault Table Part 2

haaga 677 / 697 / 697 plus
54
EN
8.2 Fault table Part 2
Fault Cause Remedy
Sweeping result is insufcient
Sweeping lip is missing, loose or worn Replace sweeping lip
Plate broom pressure too high
Set height adjustment. See Chapter 7.2
in Section “Height adjustment of the plate
brooms”
Heavy wear and tear of plate brooms
Exchange plate brooms
Sweeping container is full
Empty the sweeping container. See Chapter
7.7 Section “Empty sweeping container”
Inappropriate use of sweeping machine
according to information in Chapter 2.2
Section “Inappropriate use”
Use suitable cleaning device or cleaning
agent.
Troubleshooting