352 96-8000
ADVANCED EDITOR
June 1999
CREATE NEW PROGRAM
This menu item will create a new program, providing there is room in the program directory and enough memory
is available. Enter a program name (Onnnn) in the range of 0 through 9999 that is not already in the program
directory.
SELECT PROGRAM FROM LIST
The HAAS control maintains a directory of programs that the user can select. Select this menu item to edit a
program that exists in the directory.
When this menu item is selected, a list of programs is presented for viewing. Scroll through the list by using
the cursor keys or the jog handle. Pressing the WRITE or SELECT PROG key will select the program that is
highlighted and will replace the selection list with the selected program. The selected program is now active,
and the previously active program will appear on the inactive edit screen.
Program size and memory usage appear at the bottom of the display. SELECT PROG is the hot key for this
item.
DUPLICATE ACTIVE PROGRAM
This menu item will create a new program, copy the contents of the current program into it, rename it as
specified, and make it the active program.
ENTER NEW PROGRAM NUMBER: If no program code is present on the input line when this menu item is
invoked, this prompt will appear. Enter a valid program number (Onnnn), then press the WRITE key. Only
numeric inputs will be accepted.
DELETE PROGRAM FROM LIST
This menu item will delete a program from the program directory. A list of all programs is presented, with îš‘ALLîš’
at the end.
To delete a single program, cursor to the program number and press the WRITE key. A prompt will ask for a
confirmation of the deletion operation. Enter îš‘Yîš’ to delete the highlighted program. If any other key is pressed,
the program will not be deleted. After a program is deleted, the list of programs will again be presented.
To delete all programs, cursor to îš‘ALLîš’ and press WRITE. Confirm deletion of all programs by pressing îš‘Yîš’.
When all programs are deleted, program O0000 is created, and it is made the active program.
Press UNDO to exit this menu item and return to the active program. Program size and memory usage are
displayed at the bottom of the screen.
ERASE PROG is the hot key for this item.
To Next Page
Loading...
Need help?
General
